وسادة رقبة ومسند قطني من فوم الذاكرة، منفرداً أو كطقم

What you are ordering

Two separate pieces, three ways to buy. The head pillow is the small bone shape that sits between the headrest and your shoulders. The lumbar cushion is the taller piece that sits against the lower back.

XXX is the three-letter colour code in the table below. A set means one of each shape in the same colour; we do not mix colours inside a set unless you spell it out on the order line.

There is one page, not three. The tooling, the foam and the cover are the same across all three codes, so the choice belongs on the order rather than in a variant selector. That also means a buyer who stocks both pieces does not have to reconcile two sets of photos and two sets of specifications.

Two shapes, two sizes

The drawing in the gallery shows both pieces with their dimension lines. Thickness varies a little with how the foam is filled, so read the last row as a range rather than a tolerance.

The 40 x 30 x 8 cm figure, 9,600 cm3 and 200 g are the confirmed figures for the lumbar cushion. The head pillow dimensions are taken from the factory's dimension drawing and should be checked against a physical sample before you print a catalogue or a carton label.

What is inside

A moulded memory foam core gives each piece its shape and its slow recovery after pressure. Around it is a natural fibre outer cover with a short pile surface. We do not name that fibre more precisely on this page; if your market requires a composition label, ask for the mill's fibre declaration before you commit anything to print.

A concealed zip runs along the back edge. Open it and the cover comes away from the foam. That is the whole reason the zip is there: the cover can be washed, the foam cannot.

How it stays on the seat

An adjustable woven strap with a buckle passes around the headrest posts or the seat back. Pull it to the length that suits the seat and close the buckle. No tools, no adhesive, no sewing, and nothing is left behind on the seat when the piece comes off.

Fit is universal, not model-specific. It suits the usual front seats with two separate headrest posts and a separate backrest. Seats with integrated headrests, fixed sport shells or unusual post spacing need a check before a large order: send a photo of the seat and we will tell you plainly whether the strap will reach.

Five colours

Coffee Brown uses the same English name as the saddle-style car seat cover on this site, so the two lines can be ordered together without translating colour names back and forth. Black, Grey and Coffee Brown have both studio and in-car photos. Powder Blue and Blush Pink have studio photos only, so ask for a physical swatch before a container order; a screen colour is not a contract.

Cleaning and care

Unzip, take out the foam, wash the cover on its own, and let it dry fully before putting it back. The memory foam core must not be washed, soaked, tumble-dried or left in direct sun. Water breaks the foam down and sunlight makes the surface crumble, and neither is accepted as a defect claim.

Memory foam feels firmer in a cold cabin and softens as it warms. That is a property of the material rather than a fault, and it is worth passing on to your own customers in markets with cold winters.

What this product is not

It is not a medical or orthopaedic device, and we make no claim about neck pain, posture or circulation. It is not a safety headrest and it does not change the crash behaviour of the seat. It has no heating, no vibration and no massage function, and it is not a replacement for the vehicle's own head restraint.

It is a soft trim accessory. If your listing depends on a health claim, this is the wrong product.

Packing and container fill

Each piece ships compressed in a clear polybag and recovers its shape once opened. That makes this line a useful filler for a container already going out with seat covers or floor mats: it is light, it takes little cube, and it lets you add a bundle item without pushing the shipment into a larger container.

The 25 pieces are bagged separately, so one carton can be split across the three order codes and the five colours. If you order NK-S sets, count two pieces per set when you work out the carton split.

The 0.0052 m3 figure is packed volume, not the size of the product in use. The lumbar cushion measures 40 x 30 x 8 cm (9,600 cm3, 200 g) once it has recovered, so a packed piece takes roughly half of its unpacked volume. Quoting freight from the product dimensions rather than the carton will overstate the shipment by a wide margin.

Gross weight is an estimate, not a weighed figure. We calculated it from 25 pieces at roughly 200-250 g each plus the polybags and an empty corrugated carton; confirm the weighed carton before you book. For air and courier this line is charged on volume in any case: a 43 x 43 x 70 cm carton works out at about 21.6 kg at a 6000 divisor, well above the actual weight. Sea LCL follows the same logic, so the cube drives the freight bill here, not the gross weight.

Pairing with seat covers

This line exists because seat-cover buyers keep asking for the matching head and back pieces. Coffee Brown is shared with our Saddle-Style Car Seat Covers, whose luxury version ships with a neck pillow and a lumbar roll. If you already buy that cover, ask whether the bundled pieces match this specification before assuming they are interchangeable - the two are separate product lines with separate specifications.

For a retail bundle, NK-S-XXX is the simplest line to put on a shelf: one colour, two pieces, one carton split.

How to order

Send the code, the quantity and the colour split. For example NK-S-CBR x 300 sets. If you want a mixed-colour set, write the split per piece rather than per set, because the two pieces are packed separately before they are paired.

Tell us at enquiry stage: whether you need a composition label for the outer cover, whether you want a logo on the cover or the strap, your destination port, and whether the order is going into a mixed container. Those four answers change both the quote and the packing list.

Frequently asked questions

Can I buy only the head pillow? Yes. Order NK-N-XXX; one piece ships.

Can I buy only the lumbar cushion? Yes. Order NK-L-XXX; one piece ships.

Must the two pieces in a set be the same colour? By default yes. Write the split on the order line if you want them different.

Is it a universal fit? It suits most front seats with two separate headrest posts. Integrated or fixed headrests need a check first.

Can the foam core be washed? No. Remove the cover through the zip and wash only the cover.

Can you put our logo on it? Ask us. A logo application has its own minimum and is not included in the standard price, so we do not list it as a standard option.

Do you hold test reports? Ask for the documents that apply to your market before placing the order. We do not print certification numbers on this page.

Specifications