SKUPOP-TL-XPE-001
专车专用 XPE 绗绣尾箱垫 · 平面／平边／高边三种边型
按车型开版的 XPE 绗绣尾箱垫：平面／平边／高边三种边型，14 种配色与线色，五层复合结构。请按车型、边型与色号询价。
速览
- 起订量
- 30 套
- 生产交期
- 30 天
- 打样时间
- 10 天
- 混柜
- Mixed models, edge styles and colour/stitch codes can share one container; state the split by ordering code. The stated carton is 50 x 40 x 12 cm = 0.024 m3 per carton, assumed at 1 set per carton (NOT yet confirmed), i.e. 0.024 m3 per set (ESTIMATE by carton volume, not a weighing or a load plan). The stated weight is 1800 g per set; it has NOT been confirmed as net or gross weight, so no payload figure is published. On this basis a 20GP at 28 m3 usable holds about 1,166 sets; MOQ 30 takes 0.72 m3 (about 2.6% of a 20GP) and each spare 1 m3 fits about 41 sets. All container figures are ESTIMATE and subject to the final packing list. Because custom patterns and folded sizes differ by model, packing data must be re-checked for other patterns before freight is quoted.
- 每箱数量
- 1
- 单套 CBM
- 0.024
- 价格
- 询价
FOB 条款与价格区间按单报价。
Price on request - FOB, quoted per make/model, year, drive side, edge style, quilting pattern and colour/stitch code; MOQ 30 sets, mixed models, edge styles and colours in one container.
供货条款
这四项决定订单能不能做，我们在你确认下单前会以书面形式逐项确认。
起订量
30 套
按 SKU 计。首单可谈。
混柜
Mixed models, edge styles and colour/stitch codes can share one container; state the split by ordering code. The stated carton is 50 x 40 x 12 cm = 0.024 m3 per carton, assumed at 1 set per carton (NOT yet confirmed), i.e. 0.024 m3 per set (ESTIMATE by carton volume, not a weighing or a load plan). The stated weight is 1800 g per set; it has NOT been confirmed as net or gross weight, so no payload figure is published. On this basis a 20GP at 28 m3 usable holds about 1,166 sets; MOQ 30 takes 0.72 m3 (about 2.6% of a 20GP) and each spare 1 m3 fits about 41 sets. All container figures are ESTIMATE and subject to the final packing list. Because custom patterns and folded sizes differ by model, packing data must be re-checked for other patterns before freight is quoted.
多个 SKU 可装进同一个柜。
生产交期 / 打样时间
30 天 生产 · 10 天 打样
生产交期自收到定金起算。
样品流程
大货前寄实物样品
先验版型与材质，样品费可在大货中抵扣。
规格参数
| 材质 | Quilted eco-grade microfiber leather face over an XPE-based laminate. Five-layer build (factory specification): leather face, high-resilience high-density sponge, PE lamination instead of glue, 13x expanded XPE foam, embossed anti-slip backing. Layer order, material grades and the 13x ratio are factory-stated; no test report or certificate is published here. |
|---|---|
| 颜色 | 14 listed options: Diamond quilt / black · red stitch; Bubble quilt / black · red stitch; Diamond quilt / black · black stitch; Bubble quilt / black · black stitch; Plain black / red stitch; Plain black / gold stitch; Coffee; Diamond quilt / brown; Bubble quilt / brown; Brown; Wine red; Diamond quilt / beige; Bubble quilt / beige; Beige. The swatch card in the gallery is a photo of a colour reference sheet · not a 1:1 map of these 14 codes. Confirm the current card and stitch colour on the order sheet; we do not publish colour names that are not on the factory card. |
| 起订量 | 30 套 |
| 每箱数量 | 1 套 |
| 纸箱 | 50 × 40 × 12 cm |
| 单箱毛重 | 1.8 kg |
| 单套 CBM | 0.024 CBM |
| 单品净重 | 1.8 kg |
适配车型
产品描述
One pattern per boot floor
This is a made-to-pattern cargo liner, not a universal sheet you trim to size. We cut the outline to the boot floor of the vehicle you name, so the mat follows the sill, both wheel arches and the seat line. Send the make, model, year / generation and drive side before we quote.
The face is quilt-stitched eco-grade microfiber leather over an XPE-based laminate. It lies in the boot as one piece, with no drilling, no adhesive and no fixing clips.
Three edge styles
| Style | What it does |
|---|---|
| Flat | A flat panel that covers the boot floor only, with a bound outer edge |
| Low bound edge | A shallow turned edge that follows the floor outline without a standing wall |
| Raised wall | A higher wall that runs along the sill and up the wheel arches |
All three can be quilt-stitched. Edge height and the exact outline follow the vehicle pattern, so a raised wall tooled for one model will not match another. We do not publish edge-height numbers; ask for the pattern drawing for your model.
Quilting and colourways
Two quilt patterns and a plain face, combined with leather and stitch colours. The 14 options we currently list:
- Diamond quilt: black / red stitch, black / black stitch, brown, beige
- Bubble (rounded-hex) quilt: black / red stitch, black / black stitch, brown, beige
- Plain face: black / red stitch, black / gold stitch, coffee, brown, wine red, beige
The colour card in the gallery is a photograph of a swatch sheet, not a one-to-one map of these 14 codes. Confirm the current card and stitch colour on the order sheet; we do not publish colour names that are not on the factory card. Swatch photography can shift a shade - ask for a physical sample if the colour has to match an interior exactly.
What five layers mean here
The factory specifies a five-layer laminate, pressed as one mat:
| Layer | What the factory states |
|---|---|
| 1 | Eco-grade microfiber leather face, quilt-stitched |
| 2 | High-resilience, high-density sponge |
| 3 | PE lamination - the layers are bonded by PE, not by glue |
| 4 | 13x expanded XPE foam |
| 5 | Embossed anti-slip backing that grips the original carpet |
The backing is textured so the mat stays put without clips; the factory describes it as non-slip and non-marking on the original carpet. Layer order, material grades and the 13x expansion ratio are factory specifications supplied for this listing. We publish no abrasion, slip-resistance, load, flame-retardant or temperature rating, and no eco-certificate, without a test report.
What the photos show
| Shot | What to look at |
|---|---|
| Main image | Black / red-stitch diamond quilting, the complete one-piece mat on a white background |
| Installed in the boot | The mat lying flat, following the wheel arches and the sill |
| Colourways | Black / red, black / black, black / gold, coffee, brown, wine red and beige faces |
| Quilt close-ups | Diamond stitching and the rounded-hex "bubble" quilting |
| Edge comparison | A flat mat next to one with a raised wall |
| Layer stack | The five layers shown separated on a light background |
| Surface | Water beading on the quilted face, which can be wiped with a damp cloth |
The layer stack and the demo shots are general product views, not a measurement report for a specific car. The outline in the main image and the installed shots is one pattern example; your model follows its own pattern drawing. The swatch sheet is a colour reference, not a stock list.
Ordering and packing
Quote five things: make and model, year / generation, drive side (RHD or LHD), edge style, and quilting pattern with colour / stitch code. Mixed models, edge styles and colours can share one container; state the split by ordering code.
The stated carton is 50 x 40 x 12 cm (0.024 m3 per carton), assumed at 1 set per carton (to be confirmed), with a stated weight of 1.8 kg per set. Because custom patterns and folded sizes differ by model, packing data must be re-checked before freight is quoted on other models.
Questions we get asked
Is this a universal mat I cut myself? No. It is cut to the boot pattern of the vehicle you name.
Do you hold a pattern for my model? Send the make, model, year / generation and drive side. We confirm an existing pattern or quote a new one. We publish no fitment list and claim no approval or endorsement by any vehicle manufacturer.
Can I mix colours and edge styles in one container? Yes. State the split by ordering code on the order sheet.
Is it waterproof, flame retardant or scratch proof? The leather face can be wiped with a damp cloth, and the XPE core does not soak up water the way a textile mat does. We publish no waterproof, flame-retardant, scratch-resistance or temperature rating without a test report, even where a photo shows a demonstration.
How many fit in a container? At 50 x 40 x 12 cm and 1 set per carton (0.024 m3 per set), a 20GP at 28 m3 usable holds about 1,166 sets (ESTIMATE by carton volume, not a weighing or a load plan); MOQ 30 takes 0.72 m3, about 2.6% of a container, and each spare 1 m3 fits about 41 sets. The stated 1.8 kg has not been confirmed as gross or net weight, so no payload figure is published. Final count follows the packing list.
What is the minimum and the lead time? 30 sets, 30 days after the pattern is confirmed, sample in 10 days once the pattern exists - these are site-wide defaults, confirmed per order and per pattern.
就这款产品索取报价
把车型、数量与目标价写清楚，我们回你数字而不是形容词。