SKUPOP-FM-002
TPE 汽车脚垫，分车型定制，3D 高边，单层与双层可选
TPE 注塑成型，按车型开模贴合脚部空间，3D 高边挡水。单层款，或双层款——绒面顶层可拆下单独清洗，底层直接水冲。防水低味。
速览
- 起订量
- 30 套
- 生产交期
- 30 天
- 打样时间
- 10 天
- 混柜
- One 20GP can carry mixed models and mixed colours. State the split by code.
- 每箱数量
- 4
- 单套 CBM
- 0.028
- 价格
- 询价
FOB 条款与价格区间按单报价。
Price on request. Quoted per model and per code, mould cost stated separately.
供货条款
这四项决定订单能不能做，我们在你确认下单前会以书面形式逐项确认。
起订量
30 套
按 SKU 计。首单可谈。
混柜
One 20GP can carry mixed models and mixed colours. State the split by code.
多个 SKU 可装进同一个柜。
生产交期 / 打样时间
30 天 生产 · 10 天 打样
生产交期自收到定金起算。
样品流程
大货前寄实物样品
先验版型与材质，样品费可在大货中抵扣。
规格参数
| 材质 | TPE（热塑性弹性体）内衬，采用注塑成型工艺制成。顶层可拆卸，材质可选星光地毯、提花天鹅绒或雪尼尔。 |
|---|---|
| 颜色 | Single layer: Black. | Starlight Carpet: Coffee · Brown · Blue · Beige. | Jacquard Velvet: Brick Brown · Red · Wine Red · Steel Blue · Sand Beige. | Chenille: Pink · Grey · Brown · Black · Red Shimmer. |
| 起订量 | 30 套 |
| 每箱数量 | 4 套 |
| 纸箱 | 70 × 50 × 32 cm |
| 单箱毛重 | 22 kg |
| 单套 CBM | 0.028 CBM |
| HS 编码 | 3926.3 |
| OEM / ODM 服务 | 不可以 |
| 面层材质 | tpe |
| 底部结构 | 凸点 |
| 固定与防滑结构 | 防滑凸点 |
| 踏板区域处理 | 踏板处预留凹位 |
适配车型
产品描述
A TPE liner moulded to your own model
These liners are not trimmed down from a universal sheet. Each set is injection moulded to the footwell of the model you name, so the edges follow the sill line and the contour of the transmission tunnel, and the front pieces clear the pedals without being cut back.
The wall stands up along the sill rather than tapering flat. Water, sand and melted snow stay inside the liner instead of running onto the original carpet.
One base, four ways to finish it
Every version is built on a moulded TPE liner. What changes is the top face and the number of layers. Quote the code and we build that configuration.
| Code | Layers | Top face | Colour range |
|---|---|---|---|
TPE-001-SL | Single layer | Moulded TPE face, 3D ribs. No pad. | Black |
TPE-001-ST | Two-layer | Detachable Starlight Carpet pad, short pile with a wave pattern | Coffee, Brown, Blue, Beige |
TPE-001-JV | Two-layer | Detachable Jacquard Velvet pad, woven diamond pile | Brick Brown, Red, Wine Red, Steel Blue, Sand Beige |
TPE-001-CH | Two-layer | Detachable Chenille pad, with contrast stripes on most colours | Pink, Grey, Brown, Black, Red Shimmer |
The two-layer versions hold the pad with snap buttons, so the pad can be lifted out on its own. TPE-001-SL has no pad at all, so there is nothing to remove.
Specification
| Item | TPE-001-SL | TPE-001-ST / -JV / -CH |
|---|---|---|
| Liner material | TPE, injection moulded | TPE, injection moulded |
| Face | Moulded 3D ribs | Detachable textile pad on the TPE face |
| Underside | Moulded nubs | Moulded nubs |
| Fixing | Nubs grip the original carpet | Snap buttons for the pad, nubs underneath |
| Cleaning | Hose off, air dry. Do not machine wash. | Lift the pad out. Vacuum it or spot clean; let it dry flat. Do not hose the textile pad. The TPE base below can be hosed off. |
| Cold and heat | TPE keeps its shape in summer heat and in winter cold | Same base; the textile pad is the part to keep dry |
Tell your customers which face they bought. A chenille or velvet pad washed like a rubber mat will hold water and smell, and that is a return, not a warranty claim.
What is in a set. Every code ships a pair of front liners and a rear liner. The rear liner on the reference model runs across the full width, and the two-layer codes add two carpet panels that clip onto it. Confirm the piece count for your model at enquiry stage, because a three-row vehicle takes a different rear section.
Fitment
Send the year, model and trim with the order. Two trims of the same model can differ at the sill and around the seat rails, and the mould follows the trim you name.
For example: 2025 Toyota Land Cruiser 300 VXR.
Ask for any model sold in your market. If the mould exists we ship against it; if it does not, we tell you before you place the order rather than after.
Where the seat rails run, the liner is shaped around them so the original seat keeps its full travel.
One container can carry more than one model and more than one colour, so you can stock the volume trim as TPE-001-SL and offer the two-layer pad as the upsell on the same order.
FAQ
How do I order a specific model? Send the year, model and trim, plus the code and the quantity. We confirm fitment before production starts.
Which version sells fastest? TPE-001-SL is the volume line. The two-layer versions sell where the buyer wants the look of carpet but still wants a TPE base underneath.
Can the pad be washed in a machine? No. Lift it out, vacuum it, spot clean it, and let it dry flat. Machine washing is not recommended for the pad.
Does the two-layer version leak between the pad and the base? The pad sits on top of the TPE liner, and the TPE liner is the part that holds water. Spills that reach the base stay in the liner.
Can I mix models and colours in one order? Yes. State the split by code and by colour when you enquire, and we quote against that split.
Do you cover right-hand drive markets? Tell us the drive side and the market when you enquire, and we confirm availability for that model. The pedal box and the footrest swap over, so the drive side has to be on the order.
Get a quote
Send the model, the trim, the code and the quantity on WhatsApp. We reply with the mould status, the lead time for that model, and the price for the quantity you asked for.
就这款产品索取报价
把车型、数量与目标价写清楚，我们回你数字而不是形容词。