菱形绗缝皮革脚垫 毯面可拆换 八色可选

Two jobs, split in two

A floor mat has to do two things that pull against each other. It has to survive a wet shoe, and it has to feel like something underfoot. Most mats pick one and live with the compromise.

This one splits them. The shell is leather and it stays in the car. The pad on top is carpet, and it lifts off.

The shell

Quilted leather, stitched in a diamond grid that runs across the floor, up the door sill and along the wall of the footwell. The outer edge is bound and closed with a double row of stitching, so the part that takes the scuffing is folded and sewn rather than left as a cut edge.

The shell is the part that never leaves the car. It wipes.

The pad

Three pads fit the same shell.

Plush. A short, dense pile with a bound edge. The quietest of the three underfoot, and the one that holds dust where you can see it.

Coil. A vinyl strand looped and pressed into a mat. Grit drops between the loops instead of sitting on top of them, so the pad can be shaken out and rinsed.

Star. A carpet with a directional sheen — fine flecks that shift as the light moves, cut in soft waves across the pad. From a step away it reads as a sheen rather than a pattern.

Samples of all three can be sent before an order.

Why the pad comes off at all

Because the two halves of a floor mat wear out at completely different speeds.

The pad is what takes the heel, the grit and the wet. The shell takes almost nothing — it sits against the sill and the wall, where a shoe never lands. Glue the two together and a mat that has worn through in one square metre gets thrown away with a leather shell that is still fine.

On the studs, the worn part is the part you replace. For a fleet, a chauffeur car or a taxi, that is the difference between a pad order and a set order, once a year.

It also lets one car carry two different mat sets. Coil through the wet season, plush for the rest.

How the pad is held

Press studs, set into the pad and clipped to the shell. No glue, no hook-and-loop tape. The pad sits flat because the studs sit below the pile, and it comes off in one movement when it has to.

Because the pad is a separate panel cut on the same pattern as the shell, it cannot creep. There is nothing to slide, and nothing to re-align after a passenger has shuffled their feet.

Cleaning, one layer at a time

The pad comes out and is shaken, brushed or rinsed, depending on which of the three it is. Plush and star go back in dry — a damp pad left in a closed car is how a smell starts. Coil can go back damp and finish drying in place.

The leather shell is wiped with a damp cloth and left to dry before the pad goes back on. Nothing on the shell needs a machine, and nothing on it needs soap.

What sits under the leather

Three layers, pressed and cut to the pattern: the leather face, a foam core that gives the mat its shape and absorbs the thump of a heel, and a non-woven backing that grips the floor covering underneath. The foam is what keeps the shell from folding over at the edge of the sill.

The backing matters more than it sounds. A mat that grips does not need a clip to stay where it was put.

Where the sides go

The sides are turned up at the door sill, along the wall of the footwell, around the seat rails and forward to the edge of the pedal box. The pedals themselves sit above the mat, with nothing laid under them.

Where the seat rail passes, the pattern is cut around it rather than over it, so the seat still travels its full length.

The rear bench

The rear pattern follows the bench in the car, including the run over the centre hump and the seat-rail cut-outs on both sides. On a car with a split bench the pattern is cut to suit it.

Give us the model, the year and the body style. The pattern is checked against the library before anything is cut, and if the version is not in the library we say so before quoting — not after the deposit.

Eight colours

Eight colourways, each one a leather face and a pad in the same family. The colour card shows them half and half, face on top and pad underneath, because that is how they arrive.

A colour code is enough to order. If you are matching an interior, send a photo of the door card in daylight and we will point at the closest two.

Two of the eight carry a contrast stitch — white on black, and red on black. The stitch colour is fixed to those two colourways; it is not a free choice on the other six.

What this is not

• Not a universal mat. It is cut for one model.
• Not built to hold a spill. Neither the leather face nor any of the three pads is made for that.
• Not a replacement for the car's own floor covering. It goes on top of it.
• Not a plain leather mat. The pad is part of the design, not an extra.

FAQ

Can I order a second pad later? Yes. The pads are cut on the same pattern as the shell, so a replacement or a change of material is a pad order, not a set order.

Which pad suits a hot, dusty market? Coil. Grit falls between the loops and the pad can be shaken out at a service station. Plush looks better on a showroom floor.

Will the quilt flatten where heels rest? The foam core is what holds the shape. Under a constant heel point it will compress over time — on the driver's side before anywhere else.

Do you make it for right-hand drive? Yes. Say which side the wheel is on when you order; the pedal-box edge is mirrored for it.

Can three different pad types go in one container? Yes. The pads are cut to the same pattern, so the mix costs nothing but the paperwork.

What is the minimum? Thirty sets per order, mixed models, mixed pad types and mixed colours in one container.