Who you are dealing with
Universal car seat covers and floor mats, made in China
POP Auto Studio is a China-based manufacturer specializing in universal car seat covers and floor mats. Made in Chengdu, Sichuan since 2000 — no trading layer and no marketplace commission.
Company introduction
POP Auto Studio is a China-based manufacturer specializing in universal car seat covers and floor mats
Production runs in Chengdu, Sichuan, in a plant that has been making car interior accessories since 2000 — 50+ production workers across cutting, quilting, embroidery, stitching and QC.
Everything on this site is made on the same cutting, quilting, embroidery and stitching lines and shipped from the finished-goods warehouse. There is no marketplace commission and no trading layer between the factory cost and your order.
We publish what the plant can confirm and leave the rest out. Where a figure is not confirmed in writing yet, you will see it marked that way rather than filled in with a plausible number.
- What we make
- Universal car seat covers · 3D / 5D / 7D full-coverage floor mats · trunk linersSteering wheel covers, neck pillows and sunshades fill out a mixed container.
- Who we supply
- Wholesalers · importers · regional distributors · online sellers · brand owners
- Supply terms
- MOQ, mixed-container plan, production lead time and sample lead time — stated in writing before you commit.Full terms →
- OEM & private label
- Material, colour, pattern, packaging and branding to your swatch. A branded sample is approved before the run starts.
Why partners work with us
Six things you can actually check
Each item below is verifiable on this site, in a quotation, or in a sample.
Factory-direct pricing
You buy at the manufacturing price. No trading margin and no marketplace commission sits between our cost and your order.
OEM & private label
Material, colour, pattern, packaging and branding to your swatch. A branded sample is produced and approved before the run starts.
Fitment recorded, not guessed
Every model on this site carries a recorded pattern source — own mould, 3D scan or supplier pattern — and a verification date.
Four checkpoints on the line
Incoming material, first article, in-line sampling and pre-shipment. The record reaches you before shipment.
MOQ in writing, not in an advert
MOQ is quoted per SKU and negotiable on a first order when several SKUs are combined. The number goes into your quotation.
Export paperwork with the quote
Carton dimensions, CBM per set, HS codes and country-of-origin information — so you can build the container plan yourself.
What we export
What we export, photographed in place. Colour, stitching and material are adjustable to your swatch.
Our main products
Car seat covers
360° full-coverage custom fit, full-wrap universal and universal fit, in PU leather, PVC or laminated fabric.
universal car seat covers · full-surround seat covers · half-surround seat coversView seat covers →Car floor mats
3D / 5D / 7D full-coverage custom fit, injection-moulded TPE and universal trim-to-fit mats.
3D 5D 7D floor mats · TPE car mats · full coverage car matsView floor mats →Trunk liners
Full-coverage cargo liners and moulded TPE liners that share the same vehicle model library as the mats.
car trunk liner · cargo mat · boot liner supplierView trunk liners →
Seat covers · cream
Seat covers · quilting
Seat covers · two-tone
Floor mats · coil pile
Floor mats · moulded
Trunk liner · tan
Trunk liner · red
Wheel cover · perforated
Factory & process
Where the goods are actually made
Raw material store, cutting, quilting and embroidery, stitching lines and the finished-goods warehouse — photographed while a batch ran through the plant.
Finished & delivered
Trial-fitted on a seat, boxed and stored before loading
Covers are test-fitted and photographed before they are boxed. Finished cartons go into the finished-goods warehouse, so the batch you see on the packing list is the batch that was loaded.
Inside the plant
POP Auto Studio Factory
Raw materials, multi-layer cutting, hand trimming, piping and airbag-safe seams — then a finish check on every set.
2 min 48 s · English voice-over and on-screen captions only
Material build
Nine layers, from the wear surface down to the backing
What a mat is made of decides how it survives heat, sand and constant foot traffic. This is the lay-up in the order you would cut through it — surface first, base last.
Confirmed with the plant
Numbers we can stand behind
- 2000Manufacturing sinceCar interior accessories made at the same Sichuan plant.
- 50+Production workersCutting, quilting, embroidery, stitching and QC.
- 10,000+Sets per monthSeat covers and floor mats combined.
Quality checkpoints
Four checkpoints we follow on the partner factory line. The record reaches you before shipment.
Incoming material check
Every material batch is compared against the approved swatch before cutting starts. Out-of-tolerance shade or weight is rejected as a batch.
First-article approval
The first piece is made, photographed and sent to you before the run starts.
In-line inspection
Dimensions and stitch points are sampled at intervals through the run.
Pre-shipment inspection
A random check plus packing and carton photos before loading. We send the record and wait for your go-ahead.
Who we sell to
We supply wholesale buyers, not end consumers
Automotive accessory wholesalers
Mixed containers across models, with the SKU mix and carton count confirmed in the quotation.
Importers & regional distributors
Model-overlap lists so one container covers several of your markets instead of one.
Auto detailing & car decoration shops
Smaller first orders with a mix of seat covers, mats and liners rather than deep stock in one SKU.
Online sellers & marketplace brands
High-resolution images, specification sheets and packing data you can put straight on your own storefront.
Brand owners needing private label
Your logo, material and packaging, with one branded sample approved before the run.
No single-unit retail — we quote trade accounts only. Sample orders are charged and deducted from the bulk order.
How an order runs
From enquiry to loading
- 01
Send your requirements
Vehicle models, quantity per model, target price and destination market.
- 02
Container plan and quotation
A carton-level plan: cartons, CBM, total and slack — plus the sample lead time.
- 03
Sample and fitment check
A physical sample to verify fitment and material. Its cost is deductible from the bulk order.
- 04
Confirm and produce
30% deposit, production, then 70% before shipment.
MOQ, mixed-container rules, lead times and payment terms in full → Wholesale & OEM
Markets we serve
- Middle East
- United States
- Europe
- Africa
- Asia
The Gulf and wider Middle East come first, then the United States. We also ship to Europe, Africa and Asia on request.
Tell us the models and the quantity
Send your vehicle models, the quantity per model and your target price. We reply within one business day with a container plan and a sample lead time.
Reply within 1 business day · Mon–Fri, 09:00–18:00 GMT+8