SKUPOP-TL-TPE-001
Custom Moulded TPE Cargo Liner - One Pattern per Model
Made-to-pattern TPE cargo liner: 3D-scanned boot floor, raised wall, ribbed face. 12 shown patterns confirmed for supply; others tooled on demand, short cycle.
At a glance
- MOQ
- 30 sets
- Lead time
- 30 days
- Sample time
- 10 days
- Mixed container
- Mixed models, model years and colours can share one container; state the split by ordering code. The carton shown is 75 x 56 x 20 cm, confirmed at 1 liner per carton (owner, 2026-11-09), i.e. 0.084 m3 per set (ESTIMATE by carton volume, not a weighing or a load plan). This packing spec belongs to the pattern shown; because outlines and folded sizes differ by model, packing data must be re-checked for other patterns before freight is quoted. Gross weight is NOT yet confirmed and the field is left blank, so no payload figure is published. On this basis a 20GP at 28 m3 usable holds about 333 liners; MOQ 30 takes 2.52 m3 (about 9% of a 20GP) and each spare 1 m3 fits about 11 liners. All container figures are ESTIMATE and subject to the final packing list.
- Sets per carton
- 1
- CBM per set
- 0.084
- Price
- Request quote
FOB terms and price band are quoted per order.
Price on request - FOB, quoted per make/model, year, drive side and colour code; 12 confirmed patterns carry no new mould charge; new tooling quoted separately
Supply terms
These four items decide whether an order is workable. They are confirmed in writing before you commit.
MOQ
30 sets
Per SKU. Negotiable on a first order.
Mixed container
Mixed models, model years and colours can share one container; state the split by ordering code. The carton shown is 75 x 56 x 20 cm, confirmed at 1 liner per carton (owner, 2026-11-09), i.e. 0.084 m3 per set (ESTIMATE by carton volume, not a weighing or a load plan). This packing spec belongs to the pattern shown; because outlines and folded sizes differ by model, packing data must be re-checked for other patterns before freight is quoted. Gross weight is NOT yet confirmed and the field is left blank, so no payload figure is published. On this basis a 20GP at 28 m3 usable holds about 333 liners; MOQ 30 takes 2.52 m3 (about 9% of a 20GP) and each spare 1 m3 fits about 11 liners. All container figures are ESTIMATE and subject to the final packing list.
Combine multiple SKUs in one container.
Lead time / Sample time
30 days production · 10 days sample
Production lead time runs from deposit.
Sample process
Physical sample before bulk
Check fitment and material first; sample cost is deductible from the bulk order.
Specification
| Material | TPE (thermoplastic elastomer), moulded to the boot floor. One-piece liner with a raised outer wall and a ribbed, textured face. No textile or foam top layer. |
|---|---|
| Colours | Black · as shown. Ask for the current colour card before ordering - we do not publish colour names that are not on the factory card. |
| MOQ | 30 sets |
| Sets per carton | 1 sets |
| Carton | 75 × 56 × 20 cm |
| CBM per set | 0.084 CBM |
| HS code | 3926.3 |
| Net weight (per unit) | 2.2 kg |
Vehicle fitment
Description
One pattern per boot floor
This is a made-to-pattern TPE cargo liner, not a universal sheet trimmed to fit on site. We 3D-scan the boot floor of the vehicle, draft the outline against the sill, both wheel arches and the seat line, then mould a single-piece liner from that pattern. Factory fixing points and small service cut-outs stay accessible.
Each model, generation and drive side gets its own pattern. A liner tooled for one boot will not sit correctly in another, even under the same nameplate. That is why we ask for the vehicle details before quoting, and why the gallery shows many different outlines rather than one "universal" shape.
Pattern library - 12 confirmed patterns, new ones on demand
The white-background liners in the gallery are 12 confirmed patterns from the factory, all available for supply. Tooling exists for each of them, so these models go straight to production to order with no new mould charge. Each outline was tooled for a different vehicle, and the range shows the boot shapes we can scan and mould. Confirmed patterns:
Acura ILX · BMW X5 (2014-2018) · MG HS Gen 2 (2025) · Nissan X-Trail T33 e-Power Hybrid (2021-2025) · Subaru Forester Hybrid (2025) · Toyota Corolla (2009-2013) · Toyota GR86 (2022-2025) · Toyota Ractis XP120 RHD (2010-2017) · Toyota Supra (2020-2025) · Volkswagen Tiguan 5-seat (2018-2024) · Volvo EX30 (2025) · Volvo XC40 (2019-2025)
These 12 are confirmed available patterns - not a complete list of everything we can tool, not a stock or ready-to-ship inventory, and not a claim of OEM approval or endorsement by any vehicle manufacturer. For any other make, model, year / generation or drive side we open a new pattern on request. The factory keeps the development cycle short; we confirm an exact date, mould cost and unit price per order instead of publishing a fixed number of days. Send the vehicle details and we answer with a confirmed pattern or a new-tooling quote.
How a new pattern is made
| Step | What happens |
|---|---|
| 1. Scan | 3D scan of the actual boot floor, including the sill, wheel arches and seat line |
| 2. Draft | CAD pattern with the raised wall and cut-outs for the original fittings |
| 3. Tool | CNC-machined aluminium mould, then a trial pressing |
| 4. Verify | Test fit in the vehicle; the pattern is filed in the library for repeat orders |
| 5. Produce | Moulded liners packed to the confirmed carton spec |
New patterns are opened on demand. The factory's development cycle is short, but we confirm an exact date per order instead of publishing a fixed number; the 30-day lead time on this site covers production after the pattern is confirmed. Mould cost is quoted separately from the unit price. Once a pattern exists, repeat orders do not carry a new mould charge.
What the photos show
| Shot | What to look at |
|---|---|
| White background | A complete one-piece liner, the shaped tail toward the tailgate and the small rectangular service cut-out |
| Installed in the boot | The liner lying flat, with the raised wall running along the sill and wheel arches |
| Wall and clip close-up | How the raised edge meets the original trim and leaves factory fixing points accessible |
| Surface and cleaning | The moulded rib pattern, textured grain, and a wipe-down with a damp cloth |
| Structure and tooling | The three-layer material illustration, 3D scanning, CNC mould making and the production line |
The process shots are general workshop views, not a measurement report for a specific car. Sizes printed on the carton diagram refer to the carton shown, not to the liner dimensions of every model.
Material and care
| Item | What we can state |
|---|---|
| Material | TPE (thermoplastic elastomer), moulded |
| Construction | Three layers: a wear-resistant anti-slip top layer, a soft cushioning middle layer and a reinforced support base layer |
| Colour | Black, as shown |
| Face | Moulded ribs with a textured grain |
| Edge | Raised outer wall |
| Fixing | Friction against the original carpet; no drilling, no adhesive |
| Cleaning | Wipe with a damp cloth; lift out and air dry if soaked |
The face can be wiped, but do not machine wash, soak for long periods or use solvent cleaners. The three layers are pressed as one moulded liner; we describe what each layer does, but publish no abrasion, slip-resistance or load ratings without test reports.
Buyers in hot climates
Gulf buyers ask how the liner behaves in a hot boot. TPE does not soak up water the way a foam-backed or textile mat does. We do not publish a temperature rating without a test report - ask for the current material data sheet before quoting a figure.
Ordering codes and packing
Quote four things: make and model, year / generation, drive side (RHD or LHD), colour code. Mixed models, years and colours can share one container; state the split by ordering code.
The confirmed carton for the pattern shown is 75 x 56 x 20 cm with 1 liner per carton (0.084 m3 per set). Because outlines and folded sizes differ by model, packing data must be re-checked for other patterns before freight is quoted.
Questions we get asked
Can you make a liner for my model? Yes - that is the product. All 12 patterns shown are confirmed for supply; for any other model, year / generation or drive side we open a new pattern on request with a short development cycle. Send the vehicle details and we confirm the pattern or quote the new tooling.
Do you hold a pattern already? All 12 patterns shown in the gallery are confirmed and available for supply. For anything else we check the library; if there is no pattern we quote a new one. These are tooling confirmations, not a published stock list or ready-to-ship inventory - production is to order.
How long does a new pattern take? The factory's development cycle is short. We confirm an exact date per order rather than publishing a fixed number; the site-wide 30-day lead time starts after the pattern is confirmed.
Does one pattern cover both RHD and LHD? No. Drive side changes boot fittings and sometimes the floor shape, so we treat them as separate patterns.
Can I still fold the rear seats? For the boot-floor liner shown, yes - it covers the floor only and does not run up the seat backs. Seat-back coverage, where offered, is a separate pattern.
Is it waterproof, flame retardant or scratch proof? It is TPE, so it does not soak up water and can be wiped down. We do not publish flame-retardant or scratch-resistance claims without a test report, even where a photo shows a demonstration.
How many fit in a container? For the carton shown (75 x 56 x 20 cm, 1 liner per carton, 0.084 m3 per set), a 20GP at 28 m3 usable holds about 333 liners (ESTIMATE by carton volume, not a weighing or a load plan); MOQ 30 takes 2.52 m3, about 9% of a container. Gross weight is not yet confirmed, so we publish no payload figure. Re-check packing for other patterns. Final count follows the packing list.
What is the minimum and the lead time? 30 sets, 30 days after the pattern is confirmed, sample in 10 days once the pattern exists - these are site-wide defaults, confirmed per order and per pattern.
Request a quotation for this product
Give us the models, the quantity and your target price. We reply with numbers, not adjectives.